NOTICE: YOU MUST HAVE A GOOD INTERNET CONNECTION ON YOUR COMPUTER WHEN USING THE UPDATER SOFTWARE.

Click on the image below to download the Windows BAS2 Tool Updater Application V1.6 . Click “Save File” and save the install file to your Desktop or Downloads folder. The USB driver is compatible for Win XP as well as Win 7&8 supporting both 32 bit or 64 bit versions.

The video below shows the BAS2 Firmware Update Tool running on a PC and updating the BAS2 Remote Remap Control tools main internal firmware. Latest Firmware build is B2568 10/01/2019

Click on the image below to download the MAC BAS2 Tool Updater Application V1.3 Click the picture below and “Save File” to you Desktop or Downloads folder or where you prefer.

The video below shows the Firmware Update Tool adding the flash calibration files needed for tuning process to the BAS2 Remote Remap Control tool.

 

Latest Firmware build B2568 10/01/2019 contains the following changes.

App clean up, and usability additions.

 

When you already have the Update tool software installed on your PC and you are upgrading it to a newer version you MUST use add/remove programs on your PC to remove the outdated version before installing the latest download.

Without removing the old versions first, the latest version will not install.

 

Please note that you do not ever connect the PC/MAC to the tool with the tool connected to the car, they MUST NOT be connected at the same time.